Arrow Electronics, Inc.

Junos Layer 3 VPNs (JL3V)

CODE: JUN_JL3V

LENGTH: 3 days

PRICE: €2 350,00

Description

This three-day course is designed to provide students with MPLS-based Layer 3 virtual
private network (VPN) knowledge and configuration examples. The course includes an
overview of MPLS Layer 3 VPN concepts, scaling Layer 3 VPNs, Internet access,
Interprovider Layer 3 VPNs, and Multicast for Layer 3 VPNs. This course also covers
Junos operating system-specific implementations of Layer 3 VPNs.
These concepts are put into practice with a series of in-depth hands-on labs, which will
allow participants to gain experience in configuring and monitoring Layer 3 VPNs on
Junos OS devices. These hands-on labs utilize Juniper Networks vMX Series devices
using the Junos OS Release 19.4R1.10, and are also applicable to other MX Series
devices.

Course will be delivered using latest available course material version offered by Juniper

Objectives


• Describe the value of MPLS VPNs.
• Describe the differences between provider-provisioned VPNs and customerprovisioned VPNs.
• Describe the differences between Layer 2 VPNs and Layer 3 VPNs.
• List the provider-provisioned MPLS VPN features supported by the Junos OS
software.
• Describe the roles of a CE device, PE router, and P router in a BGP Layer 3
VPN.
• Describe the format of the BGP routing information, including VPN-IPv4
addresses and route distinguishers.
• Describe the propagation of VPN routing information within an AS.
• List the BGP design constraints to enable Layer 3 VPNs within a provider
network.
• Explain the operation of the Layer 3 VPN data plane within a provider network.
• Create a routing instance, assign interfaces to a routing instance, create routes
in a routing instance, and import/export routes from a routing instance using
route distinguishers/route targets.
• Describe the purpose of BGP extended communities, configure extended BGP
extended communities, and use BGP extended communities.
• List the steps necessary for proper operation of a PE-CE dynamic routing
protocol.
• List the troubleshooting and monitoring techniques for routing instances.
• Explain the difference between the bgp.l3vpn table and the inet.0 table of a
routing instance.
• Monitor the operation of a CE-PE dynamic routing protocol.
• Explain the operation of a PE multi-access interface in a Layer 3 VPN and list
commands to modify that behavior.
• Describe ways to support communication between sites attached to a common
PE router.
• Provision and troubleshoot hub-and-spoke Layer 3 VPNs,
• Describe the flow of control traffic and data traffic in a hub-and-spoke Layer 3
VPN.
• Describe QoS mechanisms available in L3VPNs.
• Configure L3VPN over GRE tunnels.
• Describe the RFC 4364 VPN options.
• Describe the carrier-of-carriers model.
• Configure the carrier-of-carriers and "Option C" configuration.
• Describe the flow of control and data traffic in a draft-rosen multicast VPN.
• Describe the configuration steps for establishing a draft-rosen multicast VPN.
• Monitor and verify the operation of draft-rosen multicast VPNs.
• Describe the flow of control traffic and data traffic in a next-generation multicast
VPN.
• Describe the configuration steps for establishing a next-generation multicast
VPN.
• Monitor and verify the operation of next-generation multicast VPNs.
• Describe the flow of control traffic and data traffic when using MPVNs for
Internet multicast.
• Describe the configuration steps for enabling internet multicast using MVPNs.
• Monitor and verify the operation of MVPN internet multicast.

Audience

This course benefits individuals responsible for
configuring and monitoring devices running
the Junos OS.

Prerequisites

• Intermediate-level networking knowledge and
an understanding of OSPF, ISIS, BGP, and
Junos policy
• Experience configuring MPLS label-switched
paths using Junos
• Attend the Introduction to the Junos Operating
System (IJOS), Junos Intermediate Routing
(JIR), and Junos MPLS Fundamentals (JMF)
courses prior to attending this class

Programme

Day 1
1 COURSE INTRODUCTION
2 MPLS VPNs
• MPLS VPNs
• Provider-Provisioned VPNs
3 Layer 3 VPNs
• Layer 3 VPN Terminology
• VPN-IPv4 Address Structure
• Operational Characteristics
4 Basic Layer 3 VPN Configuration
• Preliminary Steps
• PE Router Configuration
LAB: Layer 3 VPN with Static and BGP Routing
5 Layer 3 VPN Scaling and Internet Access
• Scaling Layer 3 VPNs
• Public Internet Access Options
LAB: LDP over RSVP Tunnels and Public
Internet Access


Day 2
6 Layer 3 VPNs – Advanced Topics
• Exchanging Routes between Routing
Instances
• Hub-and-Spoke Topologies
• Layer 3 VPN CoS Options
• Layer 3 VPN and GRE Tunneling Integration
• Layer 3 VPN and IPsec Integration
• Layer 3 VPN Egress Protection
• BGP Prefix-Independent Convergence (PIC)
• Edge for MPLS VPNs
• VRF Localization
• Provider Edge Link Protection
• Support for Configuring More Than 3 Million
L3VPN Labels
LAB: GRE Tunneling and Route
Redistribution
7 Interprovider Backbones for Layer 3 VPNs
• Hierarchical VPN Models
• Carrier-of-Carriers Model
• Option C Configuration
LAB: Carrier-of-Carriers VPNs
8 Troubleshooting Layer 3 VPNs
• Working with Multiple Layers
• Troubleshooting Commands on a PE Device
• Multi-Access Interfaces in Layer 3 VPNs
• PE and CE-Based Traceroutes
• Layer 3 VPN Monitoring Commands
LAB: Troubleshooting Layer 3 VPNs


Day 3
9 Draft Rosen Multicast VPNs
• Multicast Overview
• Draft Rosen MVPN Overview
• Draft Rosen MVPN Operation
• Configuration
• Monitoring
10 Next-Generation Multicast VPNs
• Multicast VPN Overview
• Next-Generation MVPN
Operation
• Configuration
• Monitoring
• Internet Multicast
• Ingress Replication
• Internet Multicast Signaling and Data Plane
• Configuring MVPN Internet Multicast
• Monitoring MVPN Internet Multicast

Session Dates